Cronus

ARGB MID TOWER CASE

Wide and sturdy chassis design supports E-ATX motherboards for maximum performance and three additional expansion slots for vertical graphics card installation. Designed in collaboration with AeroCool, this high-performance mid tower case features an X-shaped RGB LED front panel design to add a stylish flair to your rig.

Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion. Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.

Comes equipped with one 14cm ARGB fan in the rear of the case
Includes a GPU bracket that keeps your graphics card stable and prevents it from sagging
Full tempered glass side panel to showcase the inside of your rig
Six rubber cable grommets and two cable passthrough tubes allows for efficient cable management
Supports liquid cooling in the front, top, and rear of the case

Specifications are subject to change without notice.
Products and models may vary depending on your region.
Contact your local retailer for more information.

Where To Buy

FEATURES SPECS GALLERY VIDEOS

WIDE AND STURDY CHASSIS DESIGN

Featuring a chassis design focused on delivering increased interior space, you now have more freedom and possibilities to customize your PC how you want.

With more room for your graphics card, coolers and fans, and even your motherboard, the Cronus will allow you to fully maximize the performance of your PC build.

DESIGNED FOR OPTIMAL GRAPHICS CARD INSTALLATION

Built with three additional vertical expansion slots, allowing you to install your graphics card at a vertical position.

Includes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging.

ADDRESSABLE RGB COMPATIBLE

Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).

Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.

6-PORT RGB CONTROL HUB

Features a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector.

Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).

PWM COMPATIBILITY

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

• PWM based – PWM compatible
• Voltage based – not PWM compatible

For more information, refer to our PWM Compatibility Guide.

ONE 14CM ADDRESSABLE RGB FAN INCLUDED

Comes equipped with one 14cm Addressable RGB fan in the rear of the case to add a stylish flair to your rig. ARGB fan can be controlled using LED control button or ARGB motherboard.

STYLISH RGB FRONT PANEL DESIGN

Featuring a X-shaped RGB LED front panel design, this case delivers a dynamic yet powerful look and feel to your gaming setup.

Bring your case to life with preset lighting modes that can be readily controlled via LED control button.

E-ATX MOTHERBOARD SUPPORT

With support for E-ATX motherboards, this mid tower case is built for maximum performance.

BUILT FOR HIGH PERFORMANCE

Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards
Supports CPU coolers up to 180mm
Supports high-end graphics cards up to 387mm (without front radiator)

EFFICIENT CABLE MANAGEMENT

Comes equipped with six rubber cable grommets and two cable passthrough tubes (includes two additional tubes) on the motherboard tray to keep your cables neat, tidy, and secure.

FULL TEMPERED GLASS SIDE PANEL

Comes equipped with a full tempered glass side panel to showcase the inside of your rig while putting your components on full display.

IMPROVED AIR VENTILATION

Air vents in the front panel increase air flow and ventilation to keep your system cool.

AIR COOLING

Supports air cooling in the front, top and rear of the case to enhance cooling performance

Front: 120mm x 3 or 140mm x 2 (Max.)
Top: 120mm x 2 or 140mm x 2 (Max.)
Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included)

LIQUID COOLING

Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.

Front: 120/240mm Radiator (Optional)
Top: 120/240mm Radiator (Optional)
Rear: 120mm Radiator (Optional)

CONVENIENT ACCESS TO YOUR MEDIA

Quick and easy access to LED control button, 2 x USB 3.0, HD audio and mic ports, and power & reset button.

STORAGE CAPABILITY

Supports up to 3 x 3.5” HDDs (2 x 3.5” and 1 x 3.5”/2.5″) and 5 x 2.5” SSDs (4 x 2.5” and 1 x 2.5”/3.5”).

EASY MAINTENANCE

Comes equipped with removable dust filters for convenient cleaning and maintenance.

SPECS

Model	Cronus-G-BK-v1
Case Type	Mid Tower
Color	Black
Body Material	SPCC
Front Panel Material	ABS
Steel Thickness	0.7mm
Motherboards	E-ATX/ATX/micro ATX/mini-ITX
Case Dimensions (Internal)	230 x 470 x 390mm (W x H x D)
Case Dimensions (Overall)	230 x 502 x 468mm (W x H x D)
3.5” Drive Bays	3 Max. (2 x 3.5” and 1 x 3.5”/2.5″)
2.5” Drive Bays	5 Max. (4 x 2.5” and 1 x 2.5”/3.5”)
Expansion Slots	7 + 3
GPU Clearance	Supports GPU up to 387mm (without front radiator)
CPU Cooler Clearance	Supports CPU cooler up to 180mm
Air Cooling	Front: 120mm x 3 or 140mm x 2 (Max.) Top: 120mm x 2 or 140mm x 2 (Max.) Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included)
Liquid Cooling	Front: 120/240mm Radiator (Optional) Top: 120/240mm Radiator (Optional) Rear: 120mm Radiator (Optional)
I/O Ports	USB3.0 x 2 \| HD Audio & Mic.
Internal Cable Management Depth	26.55mm
Power Supply	ATX PSU (Including cables, up to 223mm) (Optional)
EAN Code	4710562758931